Wireless Warmness heated pillows offer a range of benefits, including freedom from tangled cords and the need for inconvenient outlets. The pillows utilize advanced Graphene Heating technology, making them not only waterproof, but also more energy efficient.Our pillows are made with flame retardant cotton for added safety, and they can be easily charged using magnetic charging. No need to worry about cords or outlets – just relax and enjoy the warmth of your Warmness pillow.

At Warmness, we prioritize safety in all of our products. That's why every one of our products is equipped with an overheating protection thermostat and an Auto-off function. The thermostat will automatically turn off the heat generation if the temperature becomes too high, and the Auto-off function will shut the product off after 8 hours of use.

Our products are thoroughly tested and safe for use by most people, including pets. They are equipped with a waterproof graphene heating element and made with flame retardant cotton for added safety.

However, we do not recommend using our products for individuals with pacemakers, pregnant women, or individuals who are insensitive to heat or unable to react to overheating.

If you have any doubts about whether our products are safe for you to use, please consult with a medical specialist. Your safety is our top priority.

Yes, the Warmness pillow is energy efficient, as it uses a graphene heating element.  Graphene is a highly conductive material that is able to efficiently transfer heat and is known for its low power consumption.  This means that the heating element in the Warmness pillow is able to effectively heat the pillow while using a minimal amount of energy.  This can help to save energy and reduce your energy bills.

Warmness is proud to offer heated pillows with two different battery sizes and three heating levels – low, medium, and high.

The standard 5000mAh battery allows the pillows to stay heated for 3, 2, and 1 hour on the low, medium, and high heating levels, respectively.  If you upgrade to the 10000mAh battery, the pillows can stay heated for 6, 4, and 2.5 hours on the same heating levels.

To set up your Warmness Heated Pillow:

1.    First, attach the battery to the cushion by connecting the two and twisting the connector to secure it in place.

2.   Next, place the battery in the designated pocket on the cushion.You can find the pocket by removing the Warmness Pillow Cover and opening the zipper next to the Smart Label.

3.  Cover the cushion by pulling the cover over it, making sure to thread the label through the opening.After you have pulled the pillow cover over the pillow, you can close the zipper at the back of the pillow.

4. To turn on the heat, press the power button once.Press the button again to adjust the heating level to your desired setting.

5.Finally, charge the Warmness heated cushion by plugging the charging cable into the charger and connecting the magnetic connector to the Warmness Smartlabel on the side of the pillow.

To adjust the temperature of the Warmness pillow, locate the button on the label of the pillow. Pressing this button will increase or decrease the temperature of the heating element in the pillow.

There are three heating levels indicated by three lights on the label. The number of lights that are illuminated will show you which level the pillow is currently set to. You can press the button to cycle through the different levels to find the temperature that is most comfortable for you. 

The Warmness pillow should take approximately 1-2 minutes to heat up, with the lowest heating level taking about 1 minute and the warmest level taking about 2 minutes.

Yes, the Warmness pillow can be used while it is plugged in. The pillow has a built-in power bank, which allows it to be used without being plugged in. However, it can also be used while it is plugged in using a magnetic charger.

To check the battery status of your Warmness Pillow, hold the power button for 2 seconds. The light display will then show you how much power is left in the battery:

• 3 lights = 70-100% charged

• 2 lights = 30-70% charged

• 1 light = 0-30% charged

To keep your Warmness heated pillow looking and feeling its best, you can simply wash the cushion cover in the washing machine. Follow these care instructions:

Wash the cushion cover at a maximum temperature of 30 ̊C.

Do not use bleach or any other chemical cleaners.

Do not iron the cushion cover.

Do not tumble dry the cushion cover.

Please note that the inner pillow with heating element must not be washed.

If you have any questions about international shipping, it is best to contact info@Warmnessfactory.com directly for more information.

If you have any questions about international shipping, it is best to contact info@Warmnessfactory.com directly for more information.